Washing machine drains jammed,

Could be due to clogged drains that discharge or water opening and closing mechanism, disconnected or damaged.Disconnect the plug from the socket.
If the washing machine a tube system, which can be electrical solenoid water discharges into a disconnected or damaged, it could be a faulty solenoid water disposal, among others, the coil is broken, such as being bitten by rats.Discard the water as best he could with the scoop.Roll the washing machine to remove the remaining water in the direction away from the timer and the power switch.Then set it back to her washing machine.Open the back of the washer and look near the exhaust pipe there is a tool that works the solenoid opens and closes the valve with electric power.See the cord, any color, and serial connections to be found.Measure the volt meter with the connections, operate the washing machine when disposing of the water and see if there is tension there.DC voltage is generally used.If there is tension and there was no sound when the print-functionalized shallow dispose or close, then solenoidnya damaged must be replaced.If there was no sound shallow print, but still clogged, open pipe connected to the solenoid, especially the ear opposite the exhaust pipe.Clean, surely there is a small cloth clogging.
If the washing machine 2 tube system, generally because the mechanism of the flue or opening the lid to cover the exhaust pipe is disconnected or damaged.Open the cover behind the washing machine.Check whether the current button or close the exhaust, looks the mechanism works.If the mechanism works, there is a clog.Usually because there is a small cloth like a handkerchief or a baby sock stuck and clog the drain pipe.Discard the water as best he could with the scoop.Roll the washing machine to remove the remaining water in the direction away from the timer and the power switch.Once the water is wasted down there look at the water drain hose.Move a clip to the back of the pipe and open the pipe, check for clogged pipe something or not.Position the button to the exhaust position.When positions open, see the hole or a match for the stuff it pulled something.